Datasheet

existins libraries

The following tutorials may be useful to you if you want to dig into this a bit further, and do something a bit more

advanced with your GPS data:

GETTING GPS TO WORK ON A RASPBERRY PI (https://adafru.it/aWL).

GPSD Client How-To (https://adafru.it/eUC) ... including examples in C, C++ and Python

The official GPSD project pages (https://adafru.it/aWN)

A nice writeup of using GPSd with python using threads to make it faster (https://adafru.it/cGM)

Great forum post on how to setup time synchronization with a Raspberry Pi and the PPS output of the GPS

HAT. (https://adafru.it/fEw)

Another good write-up on how to configure a Pi to use GPS and the PPS output for time

synchronization. (https://adafru.it/ytC) Note that this guide uses GPIO18 for the PPS signal but the HAT uses

GPIO4.

Doing something fun with GPS and tracking data? Be sure to post about it in the Adafruit forums () so everyone else

can get inspired by it!