Datasheet

Add even
more
power to your robot with this metal-geared servo. The tiny little
servo can rotate approximately 180 degrees (~90 in each direction), and works just
like the standard kinds you're used to but
smaller
. You can use any servo code,
hardware or library to control these servos. Good for beginners who want to make
stuff move without building a motor controller with feedback & gear box, especially
since it will fit in small places. Despite its size, this micro-servo is as strong as
many 'standard' size servos! Works great with the Motor Shield for Arduino, our
16-channel Servo Driver, or by just wiring up with the Servo library. Comes with a
few horns and hardware.
This micro servo packs a big punch for its little size. it's just a little bit bigger than
our High Torque Metal Gear Micro Servo
(https://www.adafruit.com/products/1143)but runs with almost double the stall
torque.
To control with an Arduino, we suggest connecting the orange control wire to pin 9
or 10 and using the Servo library (http://www.arduino.cc/en/Reference/Servo)
included with the Arduino IDE (see here for an example sketch
(http://arduino.cc/en/Tutorial/Sweep)). Position "0" (1.5ms pulse) is middle,
"90" (~2ms pulse) is all the way to the right, "-90" (~1ms pulse) is all the way to the
left.
Page 2 of 2
2
/
23
/
201
5
htt
p
://www.adafruit.com/
p
roducts/230
7