Datasheet

Before attaching the display, check that all the pins are

soldered nicely and there's no bridging, cold solder,

shorts, or unsoldered pins.

Now we can attach the screen. Remove the two thin

tape cover strips.

Line up the screen on the white outline, make sure

there's some space from the header you just soldered in

and the metal sides of the screen. As long as you don't

really press down on the screen you can reposition it

once or twice.

https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-

Page 12 of 70