Datasheet

The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout

3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so

we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD

card. The microSD card is not included, but you can pick one up here (http://adafru.it/102).

Of course, we wouldn't just leave you with a datasheet and a "good luck!" - we've written a full open source graphics

library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code and a wiring