Assembled Pi T-Cobbler Plus - GPIO Breakout for RasPi A+/B+/Pi 2 PRODUCT ID: 2028
DESCRIPTION - This is the assembled version of the Pi T-Cobbler Plus. It only works with the Raspberry Pi Model A+/B+/Pi 2! The Raspberry Pi B+ and Pi 2 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize using all of the Model B+'s and Pi 2's 40 pins.
Click here if you're looking for the Assembled Pi T-Cobbler that works with the Raspberry Pi Model B! Note: The Raspberry Pi Model A+ and Model Pi 2 is also compatible with this product! https://www.adafruit.
Technical Details Dimensions: 73mm x 20mm x 11mm / 2.9" x 0.8" x 0.4" Height with pins: 19mm / 0.8" Width at top of T: 58mm / 2.
