Datasheet

-DESCRIPTION
The Raspberry Pi A+/B+/Pi 2 has landed on the Maker World like a 40-GPIO
pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use
most of our great Model B accessories by hooking up our downgrade cable, its
probably a good time to upgrade your set up and accessorize using all of the Model
B+'s/Pi 2's 40 pins.
That's why we now carry the Adafruit Pi T-Cobbler Plus - Breakout + Cable for
Raspberry Pi A+/B+/Pi 2. This Cobbler is in a fancy T-shape, which is not as
compact, but is a little easier to read the labels. We also have the more compact
original Cobbler.
We also carry a Pi T-Cobbler for Raspberry Pi A+/B+/Pi 2 that does not require
soldering!
The T-Cobbler Plus is an add on prototyping board from Adafruit specifically
designed for the B+ and Pi 2 that can break out all those tasty power, GPIO, I2C
and SPI pins from the 40-pin header onto a solderless breadboard. This set will
make "cobbling together" prototypes with the Pi super easy.
The Pi T-Cobbler Plus kit comes with a 40 pin ribbon cable, a T-cobbler PCB, a 40-
pin GPIO socket, and some male header strips.
Once soldered, you can plug the 40-pin GPIO cable between the Pi computer and
the T-Cobbler breakout. The T-Cobbler can plug into any solderless breadboard
(or even a prototyping board like the PermaProto). The T-Cobbler PCB has all the
pins labeled nicely so you can go forth and build circuits without keeping a pin-out
printout at your desk. We think this will make it more fun to expand the Pi and
build custom circuitry with it.
Designed for use with Raspberry Pi Model A+/B+/Pi 2 only and requires some
soldering!