Adafruit Pi T-Cobbler Plus Kit - Breakout for Pi A+/B+/Pi 2 PRODUCT ID: 1989
DESCRIPTION - The Raspberry Pi A+/B+/Pi 2 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize using all of the Model B+'s/Pi 2's 40 pins. That's why we now carry the Adafruit Pi T-Cobbler Plus - Breakout + Cable for Raspberry Pi A+/B+/Pi 2.
The Raspberry Pi B+/Pi 2, solderless breadboard, breadboarding wires, cables, components, power supply, etc are not included! We do stock many of those items in the shop, so check those out as well! Note: The Raspberry Pi Model A+ and Raspberry Pi 2 are also compatible with this product! http://www.adafruit.
Technical Details PCB Dimensions: 73mm x 20mm x 2mm / 2.9" x 0.8" x 0.08" Width at top of T: 58mm / 2.3" Weight: 7g Assembled Dimensions: 73mm x 20mm x 11mm / 2.9" x 0.8" x 0.4" Height with pins: 19mm / 0.8" Width at top of T: 58mm / 2.
