Datasheet

Add the breakout board:

Place the breakout board over the pins so that

the short pins poke through the breakout pads

And Solder!

Be sure to solder all pins for reliable electrical

contact.

(For tips on soldering, be sure to check out

our Guide to Excellent

Soldering (http://adafru.it/aTk)).

You're done! Check your solder joints visually and continue onto the next steps

https://learn.adafruit.com/adafruit-mpr121-12-key-capacitive-touch-

sensor-breakout-tutorial

Page 9 of 20