Datasheet

Flush Diagonal Cutters
You will need flush diagonal cutters to trim the
wires and leads off of components once you
have soldered them in place.
Click here to buy our favorite
cutters (http://adafru.it/152).
Solder Sucker
Strangely enough, that's the technical term for
this desoldering vacuum tool. Useful in cleaning
up mistakes, every electrical engineer has one
of these on their desk.
Click here to buy a one (http://adafru.it/148).
Helping Third Hand With Magnifier
Not absolutely necessary but will make things
go much much faster, and it will make soldering
much easier.
Pick one up here (http://adafru.it/291).
Good light. More important than you think.
© Adafruit Industries https://learn.adafruit.com/adafruit-proto-screw-shield Page 9 of 24