Datasheet

Battery and USB connection

You can connect a battery to the breakout strip or to the JST connector. All of Adafruit

batteries come with JST cables that will plug in nicely. Watch the polarity of the cable!

the + and - markings next to the JST will let you know which way is which.

The USB connector can be soldered on to create a portable 'USB power pack'. The two data

lines on USB have resistor dividers that match Apple charger values so that you can plug any

iOS device in to charge. 99% of other phones, devices and tables are totally cool with these

resistors as well. You can always short the D+ and D- lines if you happen to have a phone

that wants shorted data lines.

If you don't want a USB connector attached, there are two holes that are designed for a

3.5mm spaced terminal block (not included)