Datasheet

Simple but effective - this breakout board has a USB Micro-B connector,

with all 5 pins broken out. Great for pairing with a microcontroller with

USB support, or adding USB 5V power to a project.

A micro-B connector is used with through-hole shielding pads for an

excellent strong connection - it won't rip off by accident!

Comes with one fully assembled and tested micro B breakout PCB and a

small stick of 0.1" header so you can solder it on and plug into a

breadboard.

 Dimensions: 10mm x 20mm x 4mm / 0.4" x 0.8" x 0.2"

 Height (w/ out micro USB connector): 1mm / 0.04"

 Weight: 0.64g

PAGE 1
Simple but effective - this breakout board has a USB Micro-B connector, with all 5 pins broken out. Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project. A micro-B connector is used with through-hole shielding pads for an excellent strong connection - it won't rip off by accident! Comes with one fully assembled and tested micro B breakout PCB and a small stick of 0.1" header so you can solder it on and plug into a breadboard.  Dimensions: 10mm x 20mm x 4mm / 0.