Datasheet

All Rights Reserved 18/18 REV B
12.6 storage
In the case of storing for a long period of time for instance, for years for the purpose or
replacement use, the following ways are recommended.
 Storage in a polyethylene bag with the opening sealed so as not to enter fresh air outside in it .
And with no desiccant.
 Placing in a dark place where neither exposure to direct sunlight nor light’s keeping the
storage temperature range.
 Storing with no touch on polarizer surface by the anything else.
[It is recommended to store them as they have been contained in the inner container at the
time of delivery from us
12.7 Safety
 It is recommendable to crash damaged or unnecessary LCD’s into pieces and wash off liquid
crystal by either of solvents such as acetone and ethanol, which should be burned up later.
 When any liquid leaked out of a damaged glass cell comes in contact with your hands, please
wash it off well with soap and water
13. Precaution For Use
13.1
A limit sample should be provided by the both parties on an occasion when the both parties
agreed its necessity. Judgment by a limit sample shall take effect after the limit sample has been
established and confirmed by the both parties.
13.2
On the following occasions, the handing of problem should be decided through discussion and
agreement between responsible of the both parties.
 When a question is arisen in this specification
 When a new problem is arisen which is not specified in this specifications
 When an inspection specifications change or operating condition change in customer is
reported to GT LCD , and some problem is arisen in this specification due to the change
 When a new problem is arisen at the customer’s operating set for sample evaluation in the
customer site.
14. Packing Method
TBD