Datasheet

All Rights Reserved 14/18 REV B
11. Inspection Standard
This standard apply to C-STN/TFT module
1. Spot check plan：
According to spot check level Ⅱ,MIL-STD-105D Level ,the rank of accept or Ⅱ
reject is below:
3A 级、2A 级：major non-conformance：AQL 0.25 minor non-conformance：AQL
0.4
A 级：major non-conformance： AQL 0.65 minor non-conformance： AQL 1.
2. Inspection condition：
Under daylight lamp 20～40W，product distance inspector’eye 30cm,incline
degree 30°。
3. LCD area define：
Area A：display area
Area B：VA area
Area C：out of VA area,not in sight after assemby
Remark :non-conformance at area C,but is OK that isn’t influence raliability of product
& assembly by customer.
30 degree
C
B
A