Datasheet

The TinyG project is a high performance, USB based CNC 6-axis

controller that supports XYZ linear and ABC rotary axes with 4 motor

outputs. It is designed for small CNC applications and other

applications that require highly controllable motion control. TinyG is

meant to be a complete embedded solution for small or medium motor

control.

Main Features:

 Full, integrated motion control system with embedded

microcontroller (Atmel ATxmega192) and 4 stepper motor

drivers (TI DRV8811) integrated on a ~4 inch square board

 Four stepper motor drivers

PAGE 1
The TinyG project is a high performance, USB based CNC 6-axis controller that supports XYZ linear and ABC rotary axes with 4 motor outputs. It is designed for small CNC applications and other applications that require highly controllable motion control. TinyG is meant to be a complete embedded solution for small or medium motor control.
PAGE 2
 Accepts G-code from USB port and interprets it locally on the board  Axis/motor mapping to support dual gantry and other configurations (e.g. XYYZ, XYZA, XYZC...