Datasheet

Try some examples

Now your hardware is ready! Let's try it out.

If you don't still have fcserver running from earlier, start it.

Plug power into your LEDs

Plug the Fadecandy Controller into your computer with a Micro USB cable

Open your web browser to http://localhost:7890 ()

You should see your Fadecandy Controller listed under Connected Devices. If you're on a

Mac, this should happen nearly instantly. On Windows it may take up to 30 seconds or so

the first time you plug in your Fadecandy, since Windows will need to automatically install

drivers.

Once you see your controller, try turning on your LEDs. We'll start with 50% brightness,

since full brightness is extremely bright!

At this point, you should see your LEDs quickly fade on. Hurray. Now for something more

interactive: