Datasheet

Assembly

Before you start check that you have the parts you need: an assembled PiTFT plate with the 2.8" screen, extra tall

female header and the 2x13 IDC socket. Note that it is normal for the screen to be 'loose' - this is so its easier for you to

solder the connector on!

This tutorial page is for PiTFT that came as a kit. If your PiTFT is already assembled, skip this step!

https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-

Page 8 of 70