Datasheet

Download & Install Kernel

The only way we're distributing the PiTFT kernel packages right now is thru apt.adafruit.com so you'll still need to run:

To add apt.adafruit.com to your list of software sources

Then install the kernel with

This will take a up to 20 minutes so go make a sandwich or coffee. It takes longer than it used to because there's now

2 kernels (v6 and v7 arm) and 2 kernel module directories.

To run these all the setup and config commands you'll need to be logged into a proper Terminal - use ssh, a

console cable, or the main text console (on a TV). The WebIDE console may not work.

curl -SLs https://apt.adafruit.com/add-pin | sudo bash

sudo apt-get install raspberrypi-bootloader

Don't use rpi-update!

https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-

Page 20 of 70