Datasheet

Once you have the screen so it is definitely not touching

the header, you can gently press on the sides to secure

the tape.

If the protective plastic cover is still on the screen you

can press it against a clean table from above. That way

you will really securely attach it!

If you want to attach an Adafruit Cobbler or similar, you

can solder in the optional 2x13 IDC on the bottom of the

screen as shown here. This will keep the top side clean

and flat. Solder in all 26 pins

The picture shows a 2x13 male header. We've since

updated this product to include an IDC socket so it's

easier to add a cobbler. Both will work, though!

https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-

Page 13 of 70