Datasheet

Breadboard friendly pins - You can easily plug this into a little breadboard and have plenty

of space for working and plugging stuff in

GPIO! - 5 GPIO pins, at 3 or 5V logic, check the next section for a detailed pinout guide

3 or 5V output - an onboard regulator provides 3.3V or 5V output for powering LEDs,

sensors, small motors, etc.

Reset Button - an onboard reset button will launch the bootloader when pressed and the

Trinket is plugged into a computer. If it is not connected to a computer, it's smart enough to

go straight to the program.

External Reset Pin - we bring out the reset pin so you can reset or restart your Trinket on

the road. If the Trinket is in a box or otherwise hard to get to, you can wire up a button to this

pin for an external reset button.

Four mounting holes make it easy to attach with 2mm screws or even tiny zip-ties, string,

etc.

Industries

https://learn.adafruit.com/introducing-trinket Page 8 of 65