Datasheet

As before, type out the command, then press the reset button to start the bootloader and once the

red LED is pulsing, hit return

When uploading, you will see a lot of avrdude: 8 retries during SPI command and similar

warnings. THIS IS OK! Because of the way the ATtiny85 works, there's a small delay when writing

the new program to flash, and during that delay, it cannot save the data and also send USB data at

the same time. This causes the USB reply to avrdude to be delayed and avrdude to spit out the

retry alert.

Industries

https://learn.adafruit.com/introducing-trinket Page 54 of 65