Installation manual

Suite 7.1 Installation Manual
www.ada-usa.com 37
To Set Auto Balance
1. Make sure that Pro Logic II Music or custom 1-3 mode is selected on the main display.
2. Press and hold the Mode knob until the display changes to the Tone, Balance, and Volume recall
setup.
3. Rotate the Mode knob until the cursor is flashing over the
P in PRO SETUP.
4. Press the Mode knob. The display will change to the Pro Setup menu.
5. Rotate the Mode knob until the cursor flashes over the
P in PL.
6. Press the Mode knob. The display will change to the speaker level menu with the cursor flashing
over the P in PL 1.
7. Rotate the Mode knob until the cursor flashes over the
A in AUTOBALANCE
8. Rotate the Input knob to turn Auto balance on or off.
The Panorama Parameter
This parameter expands the sound field created by the front left and right speakers to “wrap around”
the listening field to create an even greater sense of envelopment than provided by the surround speakers.
To Set the Panorama Parameter:
1. Make sure that Pro Logic II Music or custom 1-3 mode is selected on the main display.
2. Press and hold the Mode knob until the display changes to the Tone, Balance, and Volume recall.
3. Rotate the Mode knob until the cursor is flashing over the P in PRO SETUP.
4. Press the Mode knob. The display will change to the Pro Setup menu.
5. Rotate the Mode knob until the cursor flashes over the P in PL. Press the Mode knob.
6. The display will change to the speaker level menu with the cursor flashing over the P in PL 1.
7. Rotate the Mode knob until the cursor flashes over the P in PANORAMA.
8. Rotate the Input knob to turn Panorama on or off.
Right Surround Channel Polarity Inversion
This parameter allows you to invert the polarity of the Right Surround speaker with respect to the Left
Surround speaker. This can have a dramatic effect on the localization of the surround speakers in the
home theater system.
To Set Right Surround Speaker Polarity:
1. Make sure that Pro Logic II Music or custom 1-3 mode is selected on the main display.
2. Press and hold the Mode knob until the display changes to the Tone, Balance, and Volume recall.
3. Rotate the Mode knob until the cursor is flashing over the P in PRO SETUP.
4. Press the Mode knob. The display will change to the Pro Setup menu.
5. Rotate the Mode knob until the cursor flashes over the P in PL. Press the Mode knob.
6. The display will change to the speaker level menu with the cursor flashing over the P in PL 1.
7. Rotate the Mode knob until the cursor flashes over the R in RS POL.
8. Rotate the Input knob to turn invert the polarity of the Right Surround channel.
Matrix Coefficient Setting
The matrix coefficient parameter allows you to set the amount of separation in the surround channels.
There are three settings available for matrix coefficient. The 0 setting provides a monaural surround
channel, the 1 setting creates a stereo image in the surround channels, and the 2 setting creates a
panoramic surround channel experience. We recommend playing back a two-channel source when
experimenting with the matrix coefficient settings.