User manual

HTR-2400 Manual Page 7 Connections - Rear Panel
Component Video Output
YP
B P R
Component Video Input 2
Component Video Input 1
YP
B P R
Component Video Input 3
YP
B P R YP B P R
Room 1 &
Theater
Room 2
S-Video Out
2
1
S-Video Inputs
2
1
4
3
AUXILIARY or VCR
CABLE BOX
SATELLITE
DVD PLAYER
Component Video Output
YP
B P R
Component Video Input 2
Component Video Input 1
YP
B P R
Component Video Input 3
YP
B P R YP B P R
Video
Out
Room 5
m
7 Room 3 Room 1 &
Theater
m
8 Room 6 Room 4 Room 2
S-Video Out
2
1
S-Video Inputs
2
1
4
3
CABLE BOX
SATELLITE
DVD PLAYER
DVR/PVR (Theater Only)
LASER DISC AC-3 (Theater Only)
CABLE BOX
SATELLITE
DVD PLAYER
LASER DISC PCM (Theater Only)
Com
p
Y
Component Video Input 2
Component Video Input 1
YP B P R
Com
p
YYP B P R
Video
In
Video
Out
Source 2 Source 4 Source 6 Source 8
Source 1 Source 3 Source 5 Source 7
Room 5
Room 7 Room 3 Room 1 &
Theater
Room 8 Room 6 Room 4 Room 2
VCR (If Auxiliary is already used.)
LASER DISC (Theater Only)
DVR/PVR (Theater Only)
u
ts
r
ner)
IRL-5000
4
Source 3 Source 2 Source 1
6 CHANNEL DVD AUDIO INPUT
Because you can limit the number of inputs dis-
played, rename the source names, reassign
jacks, this setup serves only as an example of
what can be done and corresponds to the HTR-
2400’s out of the box factory default setup.
For digital audio sources, if coax type connec-
tions are available, ADA suggests using these
over TOS-Link connectors. When using TOS-
Link interconnects ADA suggests using the best
caliber cable available (frosted tip or convex tip).
TOS-Link cables have been known to reflect
against the TOS-Link receiver causing for audio
dropouts. Better cables help prevent this.
For DVD Audio discrete 5.1 playback, a six-chan-
nel analog bypass input is used on the HTR-
2400. Please note, that in order to access this
input, you will need to select a source name that
is not used, relabel it to read DVD AUDIO, and
assign the audio input to ANALOG BYPAS.
Because the HTR-2400’s Home Theater has
open input assignment, it can use open (or un-
used) composite video inputs. In a common
setup, house inputs 1-4 are used by the tuners
and CD players and these devices typically do
not output any video. As such, the Home The-
ater can use these video inputs for theater spe-
cific sources like a DVR, VCR or Laser Disc
player.
The S-Video switcher of the HTR-2400 permits
four S-Video signals to be routed to two outputs.
Both outputs play the same signal. Please note
that an S-Video input only comes out of an S-
Video output.
The component video switcher of the HTR-2400
permits three component video signals to be
routed to one component video output. The com-
ponent video output only routes component video
inputs. If you wish to view composite or S-Video
sources on your display, you will need to con-
nect both composite video, S-Video and compo-
nent video from the HTR-2400 to your display
device.