User manual

Connections - Rear Panel Page 6 HTR-2400 Manual
SOURCE CONNECTIONS (HOME & THEATER)
Home
Theater
Amplified
Audio
Output
7.1 Channels
Front
Left
+-
Surround
Left
-+
Front Right Surround Right
+--+
+
- - +
LR
Room 4
(8 - 2 )
+ - - +
LR
Room 5
(8 - 2 )
+ - - +
LR
Room 6
(8 - 2 )
+ - - +
LR
Room 7
(8 - 2 )
+ - - +
LR
Room 8
(8 - 2 )
Room Keypad Control Connections • Use Any RJ-45 Port ADA
B
RJ-45 Ports Are Not Room Specific • Cat. 5 Wire Is Straight-Through
1
Gnd
O
TX RX
Component
V
YPB
Component Video Input 2
Component Video Input 1
YP
B PR
Component V
i
YPBYPB PR
Video
In
Video
Out
Source 2 Source 4 Source 6 Source 8
Source 1 Source 3 Source 5 Source 7
Room 5
Room 7 Room 3 Room 1 &
Theater
Room 8 Room 6 Room 4 Room 2
IR Emitter Outputs
RS-232
Switch
IR Receiver (Learner)
IRL-5000
IR Learn
Mode
(IRL-5000)
N
ormal
Mode
C
Setup
RS-232
C
ontrol)
Source 8 Source 7 Source 6 Source 5 Source 4 Source 3 Source 2 Source 1
AUXILIARY
DVD PLAYER
CABLE BOX
SATELLITE
CD LIBRARY
CD PLAYER
Com
p
Y
Component Video Input 2
Component Video Input 1
YP B P R
Com
p
YYP B P R
Video
In
Video
Out
Source 2 Source 4 Source 6 Source 8
Source 1 Source 3 Source 5 Source 7
Room 5
Room 7 Room 3 Room 1 &
Theater
Room 8 Room 6 Room 4 Room 2
AUXILIARY or VCR
CABLE BOX
SATELLITE
DVD PLAYER
Because the HTR-2400 is actually two system in
one, it is important to remember that the analog
sources that play in the house can also play in
the theater while the digital sources that play in
the theater will not play in the house. As such,
some sources will require two audio connections.
For example, a DVD player will require an ana-
log audio connection for playback in the house
while the theater will require a digital audio con-
nection for playback of 5.1 encoded material. The
theater connections will be discussed later.
The HTR-2400’s out of the box source setup is:
Even if you are not distributing composite video
throughout the house, you will still want to con-
nect the sources’ composite video outputs to the
HTR-2400. Because the front panel 16 x 9 color
LCD display only runs composite video, in order
to preview images on this display, the HTR-2400
must receive a composite video signal.
SOURCE NAME/# AUDIO INPUT VIDEO INPUT
XM TUNER 1 ANALOG 1 OPEN
FM TUNER 2 ANALOG 2 OPEN
CD PLAYER 3 ANALOG 3 OPEN
CD LIBRARY 4 ANALOG 4 OPEN
SATELLITE 5 ANALOG 5 VIDEO 5
CABLE BOX 6 ANALOG 6 VIDEO 6
DVD PLAYER 7 ANALOG 7 VIDEO 7
AUXILIARY 8 ANALOG 8 VIDEO 8
SOURCE CONNECTIONS (THEATER ONLY)
INPUT NAME/# AUDIO VIDEO S-VIDEO COMPONENT
XM TUNER 1 ANALOG 1 OFF OFF OFF
FM TUNER 2 ANALOG 2 OFF OFF OFF
CD PLAYER 3 ANALOG 3 OFF OFF OFF
CD LIBRARY 4 ANALOG 4 OFF OFF OFF
SATELLITE 5 DIGITAL 1 VIDEO 5 S1 C1
CABLE BOX 6 DIGITAL 2 VIDEO 6 S2 C2
DVD PLAYER 7 DIGITAL 3 VIDEO 7 S3 C3
AUXILIARY 8 ANALOG 8 VIDEO 8 S4 OFF
VCR 9 ANALOG 8 VIDEO 4 S4 OFF
DVR/PVR 10 DIGITAL 4 VIDEO 3 OFF OFF
VIDEOGAME 11 ANALOG 8 VIDEO 3 OFF OFF
CAMCORDER 12 ANALOG 8 VIDEO 3 OFF OFF
COMPUTER 13 ANALOG 8 VIDEO 3 OFF OFF
LASERDISC 14 DIGITAL 5 VIDEO 2 OFF OFF
LASRER AC3 15 DIGITAL 6 VIDEO 2 OFF OFF
PHONOGRAPH 16 ANALOG 8 OFF OFF OFF
SAT RECORD 17 ANALOG 5 VIDEO 5 S 1 C1
TV RECORD 18 ANALOG 6 VIDEO 6 S2 C2
DVD RECORD 19 ANALOG 7 VIDEO 7 S3 C3
DVR RECORD 20 ANALOG 8 VIDEO 3 S4 OFF
The Home Theater source setup is more flexible
than the multi-room system. The multi-room
audio and video jacks are linked together numeri-
cally (audio input 1 tracks video input 1, audio
input 2 tracks video input 2, etc.). For the Home
Theater, the source names (input names) can
be openly assigned to any audio jack (analog or
digital), composite video, S-Video, and compo-
nent video input. This makes it easy to both cus-
tomize the HTR-2400 to your particular installa-
tion and maximize your inputs.
While the HTR-2400’s out of the box setup (as
shown in the chart to the right) shows for 20 in-
put labels, note that several use the same jacks.