Installation manual

Page 38
S-Video Input Configuration
As with the composite video input, the S-Video for the DSS RECORD input label needs to be set to
track the S-Video input for the DSS’s normal input. As the DSS is set to track S-Video input #2,
proceed with the following:
9 Turn the Mode knob clockwise until the display’s second line reads SVIDEO INPUT and press
the Mode knob.
10 Turn the Mode knob until the display reads SVIDEO INPUT 2 and then press the Mode knob.
Component Video Input Configuration
To keep the system perfectly aligned, we will need to assign the component video input for the eighth
input label, DSS RECORD 8, to match that of the normal DSS input. To do so:
11 Turn the Mode knob clockwise until the display’s second line reads COMPONENT IN and
press the Mode knob.
12 Turn the Mode knob until the display reads COMPONENT IN 2 and press the mode knob.
At this time, you have reassigned all of the A/V inputs on the Cinema Rhapsody Mach II from the
factory default settings for the AUXILIARY 8 input label to work for the DSS RECORD 8 input label.
Auxiliary DC Triggers
The Cinema Rhapsody Mach II has two low voltage outputs which can be used to trigger other com-
ponents or devices. These triggers can be used to perform several different operations such as:
a Engaging a projector, screen, etc., for only video devices.
b Alternate speaker drivers between music and film playback.
c Turning on a power amplifier using an external AC switcher (ADA ACC-3 - 15 Amp Rating) if
the amplifier will draw more than 10 amps current (Cinema Rhapsody's Switched AC Outlet
maximum).
The Cinema Rhapsody sports two such triggers and both of these triggers are input specific. The Out
of the Box setup is as follows:
AUX DC TRIG 1 = Engages with all inputs.
AUX DC TRIG 2 = Engages with only the components that have a video inputs:
DVD PLAYER 1, DSS 2, DVR/PVR 3, VCR 4, CABLE/TV 5, AUXILIARY 8, DVD AUDIO 9, CAMCORDER 11, VIDEO
GAME 12, COMPUTER 13, DVD RECORD 14, DSS RECORD 15, DVR RECORD 16, TV RECORD 17, AUXILIARY 2,
& AUXILIARY 3
Since most home theaters using this feature will involve some level of professional setup, you
can alter the Aux DC Triggers using the following steps. If you are planning on adjusting the
Final Input or Input Labels, ADA suggests first making these adjustments prior to proceeding
with the Aux DC Trigger setup.