Installation manual

Page 37
Assuming that the DSS
RECORD setup was followed
as outline under the Record
section of this manual, the
DSS receiver’s analog audio
output has already been con-
nected to the Cinema
Rhapsody's Analog input #2 as
in the diagram. This connec-
tion is in addition to the stan-
dard DSS connections in the
Out of the Box setup.
The first step is to now config-
ure the DSS RECORD 8 input
label to track analog input #2.
1 Turn the Input knob until DSS RECORD is seen on the display’s second line and press the
Input knob.
2 Turn the Mode knob clockwise until the display’s second line reads SETUP MENU and press
the Mode knob.
3 Turn the Mode knob clockwise until the display’s second line reads AUDIO INPUTS and press
the Mode knob.
4 Turn the Mode knob counterclockwise until the display’s second line reads ANALOG 2 instead
of ANALOG 8.
5 Press the Mode knob to return the display to read SETUP MENU & AUDIO INPUTS. As we
will be making changes to the video inputs, you need not exit the setup mode yet.
These steps can be used to reassign any input label to either a digital coaxial, optical TOS-Link, or
analog stereo audio input.
Composite Video Input Configuration
To alter an input label’s composite video rear panel connection, one uses the same process as with
the audio jack. Continuing with this example, the DSS receiver’s normal playback input label is as-
signed to Composite Video input #2. The AUXILIARY input label is Out of the Box defaulted to com-
posite video input #8. As such, with the DSS RECORD input label replacing AUXILIARY, we will need
to reassign the video input so that DSS RECORD tracks the same video jack as normal DSS. To do
so, follow these steps (assuming you have not exited the SETUP MENU).
6 Turn the Mode knob clockwise until the display’s second line reads COMPOSITE IN and press
the Mode knob.
7 Turn the Mode knob counterclockwise to change the display from COMPOSITE IN 8 to COM-
POSITE IN 2.
8 Press the Mode knob to return to the previous state where the display reads SETUP MENU &
COMPOSITE IN.
DSS RECEIVER
ANALOG AUDIO RECORDING CONNECTION
(IN ADDITION TO OTHER DIGITAL AUDIO AND VIDEO CONNECTIONS)
Stereo
Audio Out
RL
1
1
2
2
3
4
3
5
6
4
7
8
5
1
2
6
REC
OSD
78
L
R
L
R
L
R
L
R
AUDIO INPUTS
VIDEO INPUTS
VIDEO OUT
1
2
3
4
DIGITAL AUDIO
INPUTS
AC INPUT
115V~60Hz/230V~50Hz
AC OUTPUT
10A~ Max Switched
ADA Bus¤
1 2 3 4
DATA PORT
Serial Data
12VDC OUT
100mA Max Per
DC 1
1- 2+
DC 2
1- 2+
WARNING! Risk Of Hazardous Energy! Make Proper
Connections.
AVERTISSEMENT! Energie Electrique Dangereuse!
Faire Des Connexions Propres Pour L’Hautparleur.
Voir La Notice De Fonctionnement.
CAUTION: Disconnect Supply Cord Before
Servicing.
ATTENTION: Debrancher Avant Le Depannage.
Use Same
Value Fuse
115V~1AS.B.
230V~.5AS.B.
Voltage
Selector &
Safety Fuse
On This Side
115 V
115V 230V
123
OPTICAL INPUTS
MAIN 2
3
41
S-VIDEO INPUTS
8 CHANNEL DB-25 INPUT
REC
SBL LS
RS
L
R
C
SUBSBR
MAIN
4
G ND O UT I N 12 V DC
L
R
RECORD
OUT
COMPONENT VIDEO
Y
P
B
P R
Y
P
B/B-Y P R/R-Y
Y
P
B/B-Y P R/R-Y
O UTPUT
1
2
3
113
25 14
PIN
POINTS
C INEMA R HAPSODY M ACH II
H
OME T HEATER C ONTROLLER
Lucasfilm Ltd. U.S. patent numbers
5,043,970; 5,189,703; and/or 5,222,059.
European patent number 0323830.
Other U.S. and foreign patents pending.
Lucasfilm and THX are trademarks or
registered trademarks of Lucasfilm Ltd.
Surround EX is a jointly developed
technology of THX and Dolby
Laboratories, Inc., and is a trademark of
Dolby. Used under authorization.
"Dolby", "Pro Logic", & the double-D
Symbol are trademarks of Dolby
Laboratories. All rights reserved.
Manufactured under license from Digital
Theater Systems, Inc. US Pat. No.
5,451,942, 5,956,764, 5,974,380,
5,978,762 and other worldwide patents
issued and pending. "DTS", "DTS-ES
Extended Surround", and "Neo 6" are
trademarks of Digital Theater Systems,
Inc. ' 1996, 2000 Digital Theater
Systems, Inc. All rights reserved.
Manufactured under license from
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION!
RISQUE DE CHOC ELECTRIQUE.
NE PAS OUVRIR
MADE IN U.S.A.
ADA NET“
+10dB
PIN +/- CHAN PIN +/- CHAN
1 / 14 LT 7 / 20 SBL
2 / 15 CT 8 / 21 SBR
3 / 16 RT 9 /10/22 SHLD
4 / 17 SB 11 / 23 R.T.A
5 / 18 SL 12 / 24 R.T.B
6 / 19 SR 13 / 25 R.T.C
0dB
MULTI-PIN LFE SUM
Audio Cable
2
2