Installation manual

Page 28
Setup 4 - Bass Limiter
The Cinema Rhapsody Mach 4 provides you with
the ability to engage a Bass Peak Limiter that op-
erates in a range from 0 dB (decibels) to -24 dB.
The function of the Bass Peak Limiter is to reduce
the possibility of overloading the subwoofer in
cases of extreme volume and/or software that
provides extremely dynamic bass information. If
your subwoofer is capable of providing a large
level of bass without bottoming out, you may not
need to engage the Bass Peak Limiter (leaving it
Off). If however, you play your system at volume
levels that on occasion will cause your subwoofer
to play distorted audio segments, you will wish
to engage the Bass Peak Limiter. The Cinema
Rhapsody Mach 4’s “Out Of The Box” setup has
the Bass Peak Limiter, also known as the Bass
Limiter, set to OFF.
When setting Bass Peak Limiter using the PC
program, select the side THEATER tab, the PRO
SETUP top tab and then the 4-BASS sub tab.
Here you can increase (UP) or decrease (DN) the
limiter level in dBs. All changes occur in real-time
(instantly).
From the front of the Cinema Rhapsody Mach 4,
while in the setup mode, use the Mode knob to
navigate to the word PRO SETUP and press the
Mode knob. On the page that features LABELS/
AV in the top left corner, use the Mode knob to
navigate to the BASS option and press the Mode
knob.
You are now on the Bass Peak Limiter page with
the cursor ashing on CEILING. To engage and/
or alter the Limiter, turn the Input knob accord-
ingly. The Bass Peak Limiter range is OFF (0
dB) to -24 dB.
To return to the previous page, turn the Mode knob
to PREV and press the Mode knob.
To exit the Setup Mode entirely, navigate to the
letter MAIN and press the Mode knob.