Installation manual

Page 27
When setting up your speaker array using the PC
program, select the side THEATER tab, the PRO
SETUP top tab and then the 3-DELAYS sub tab.
Here you can increase (UP) or decrease (DN)
the delay levels by channel. All changes occur
in real-time (instantly).
The Master Delay is a global delay or lip sync de-
lay. This feature can be added to remote control
or touchscreen permitting the end user to com-
pensate for lip sync issues which can vary from
source to source and even program content.
If you want to see the delays currently active on
the Cinema Rhapsody Mach 4, press the UPDATE
DELAYS button.
From the front of the Cinema Rhapsody Mach
4, while in the setup mode, use the Mode knob
to navigate to the word SETUP and press the
Mode knob. On the page that features LABELS/
AV in the top left corner, use the Mode knob to
navigate to the DELAYS option and press the
Mode knob.
You are now on the Delays page with the cursor
ashing on the L or Left channel. To alter the
number (in 1/10th feet or 3cm) turn the Input knob.
To adjust other speaker channels, turn the Mode
knob and accordingly use the Input knob to make
any changes.
To set the Master (Lip Syn) delay, turn the Mode
knob so that the cursor is on MASTER. Turn the
Input knob to adjust the Master Delay. Navigate
to PREV to return to the previous screen.
To store the Balance and Delay levels (but not the
Master Delay) on a Balance Preset, turn the Mode
knob to STORE and then turn the Input knob to
select the Preset number you wish to store. Then
press the Input knob to store that preset.
Storing the Balance Presets on either the Delay
or the Speaker Level screens stores both delays
and levels.