Installation manual

Page 21
Final Input
The Final Input feature lets you limit the number
of inputs visible to the user as they turn the Input
knob during normal operation. So instead of
scrolling through all twenty (factory default) input
labels, you can set the unit to display just the
inputs available in your system.
Sometimes, the nal input number corresponds
to the number of source devices connected to
the Cinema Rhapsody Mach 4. However, if you
are using the Cinema Rhapsody Mach 4’s vir-
tual inputs such that a single source component
takes up multiple Input Labels with different Input
Presets and/or Default Modes, the Final Input
number will be greater than the number of source
components.
Determine the number of virtual inputs (Input La-
bels) you are using and then set the Final Input
to that number.
Note: Final Input reduces the number of inputs
visible by eliminating the highest input labels in
order. You cannot set the Cinema Rhapsody
Mach 4 to skip over inputs that are not used. If
you have an Input Label that you want to use
above an Input Label you are not using, you will
need to recreate the input settings on a lower
Input Label number.
Note: Unlike other virtual input related features,
the adjustment of the Final Input is in real time
(instantaneous). There is no “loading” required.
Once set, the highest input you can select will be
the Final Input number.
To set the Final Input number in the PC program,
Select the side THEATER tab and then the top
INPUTS tab. Using the FINAL INPUT DN or UP
buttons, adjust the Final Input number. The Final
Input number will change in the feedback area to
the right of these buttons.
From the front of the Cinema Rhapsody Mach
4, while on the LABELS/AV display, navigate the
cursor to MAX INPUT using the Mode knob. Use
the Input knob to adjust the Final Input number.
When you are nished, you can return to the
previous menu page by selecting PREV or exit
the Setup Menu by selecting MAIN.