Installation manual

Page 18
Input Presets
The Cinema Rhapsody Mach 4 has the ability
to engage certain feature sets when an input is
selected. One of these is:
Auto Delay - Rated in milliseconds (0-200).
In addition to setting the Audio Delay, you can
also assign one of four inputs for each of the
following.
Volume - The volume preset lets you assign a
starting volume level for a specic input. If the unit
is off and an input with a specic volume preset
is selected, the Turn On volume preset is ignored
and this input specic volume preset is used.
Balance - The balance preset stores channel
levels and delay levels.
Tone - The tone preset stores the parametric bass
and treble control.
PEQ - The multi-band parametric equalizer fea-
tures a 12 band EQ for all channels and an 8 band
EQ for the subwoofer.
Speakers - The speaker conguration lets you
determine which speakers are active, whether
they roll-off, and their roll-off frequency.
Dolby Volume - The Dolby Volume preset can be
recalled automatically per input.
To change these settings you must use the PC
program.
Note - Changes are not effected until you have
performed a LOAD.