WESSON WALL SHELF ASSEMBLY MANUAL We support the proper recycling of waste materials, and encourage you to properly recycle any leftover or waste materials. Help us preserve the environment for a better WORLD. Thank you for choosing our products.
Dear Customer, This product has been extensively tested prior to shipment. However, some components may be missing or damaged during transportation. If this happens, please send a request for the missing or damaged parts. Use the included service card to describe the part completely and we will replace the part as quickly as possible. Before assembling, check the included parts list to verify all parts are available. Prior to assembly, clean all components with a damp cloth.
ATTENTION !!! This unit should be assembled by two people ACCESSORY LIST A09 4x50 YHB Screw 16x A10 3,5x18 YHB Screw 8x A04 Cover Sticker 8x GENERAL VIEW A08 Ø8 Anchor 8x A07 ‐L‐ Bracket 8x
ASSEMBLY MANUAL 02 A09 01 4x50 YHB Screw 02 A09 01 4x50 YHB Screw 02 A09 01 4x50 YHB Screw A09 4x50 YHB Screw 02 01
A08 A02 64mm A07 A02 A10 A09 64mm A04 IMPORTANT; The screw supplied with the anti-topple bracket is to be used only for fixing the anti-topple bracket to the furniture. In addition, you will need to choose a screw or fitting which is suitable for securing the bracket to the type of walls you have. If you are unsure about what type of screw to use, contact your local hardware store.
PARTS REPLACEMENT FORM Style No Parts Letter Parts Description CUSTOMER INFORMATION NAME: ADDRESS: CITY/STATE/ZIP CODE: PHONE NUMBER: Please indicate where you purchased this item (Website/Store/Catalog): Please indicate color/size/style number: Quantity
• • • • • • • • • This unit contains small parts which could be a choking hazard for small children. Children should be under adult supervision at all times. Do not overload the unit. Each shelf has a recommended capacity of 13 pounds, and the total weight on the unit should not exceed 39 pounds for wall shelves. Do not climb, step, or stand on the unit. Do not mount or attach items to the front, rear, or sides of the unit. This can cause the unit to become unbalanced and fall. Do not stack units.
