User manual
Page 4
other cabinet simulators is the NATURAL RESONANCE filters at the low-end that
resonate of “ring” like a real sealed cabinet. You can select an open-back cabinet or a
sealed cabinet with the OPEN-BACK / SEALED switch. It’s like a travel machine that
takes to back and forth between the UK and the US. Finally we have added a MIC
POSITION potentiometer to allow you to tailor the low and high frequencies of a real
speaker cabinet in the same way a sound engineer would by moving a microphone
near the edge or the center of the miked speaker cone. As recording engineers will tell
you, the microphone placement is the key to achieving the right tonal spectrum for a
given track and can make or break the quality of your solos and chording.
FEATURES
Selectable 10” or 12” Speaker Size
Selectable VINTAGE (alnico) or MODERN (ceramic) Speaker Character
Selectable OPEN BACK or SEALED Cabinet Type
Variable MICROPHONE PLACEMENT Control to “position” the mic for deep or bright
frequency response.
¼” phone jack INPUT with a direct, un-buffered PASS THROUGH ¼” phone jack. This
effectively splits the signal to feed both a guitar amplifier and a mixing console
POWER AMP DIRECT CONNECT with -30dB INPUT PAD, allows for inserting the
GCS-3 between your power amp output and your speaker cabinet or speaker load.