User`s manual

AD-net Technology. CO LTD
- 24 - www.ad-net.com.tw
Parameters Option Explanations
SNMP Write
Community
Configure commands of
device nodes
Default: private
SNMP Trap
Community
Receive commands of Trap
Default: public
SNMP
Port Number
The communication ports
connecting the devices with
SNMP, SNMP protocol,
Default: port: 16
SNMP Trap
Address
Address used to receive Trap
information: The most
addresses and ports can be
set is up to 5. That means the
device can sent Trap
information to 5 network
management equipments.
SNMP Trap Address needs
to be configured at the first
time(initial value: 0), but it
can be saved and recovered.
SNMP Trap
Address
and Port
SNMP Trap
Port
Ports used to receive Trap
information: it needs to be
configured at the first time
(initial value: 0), but it can
be saved and recovered.
5.7 System Configuration
This section includes time configuration, change the password, Default
parameter recovery, upgrade online and reboot system.
5.7.1 System time management
System time can be modified in three ways: manually enter the time, Get Local
Time or SNMP network time. As shown in Fig 5.7-1.
Fig 5.7-1 system time management
Manuel de l'usager du Mux IP vers 2xE1
www.hypercable.fr