User`s manual

Combustion Air - Prevention of Contamination
3
SECTION I - COMBUSTION AIR - PREVENTION OF
C
ONTAMINATION
If the CHALLENGER combustion air inlet is located
in any area likely to cause or contain contamination,
or if products, which would contaminate the air can-
not be removed, the combustion air must be re-
piped and terminated to another location.
Contaminated combustion air will damage the appli-
ance and its burner system, resulting in possible
severe personal injury, death or substantial property
damage.
Do not operate a CHALLENGER if its combustion air
inlet or the appliance is located in or near a laundry
room or pool facility. These areas will always con-
tain hazardous contaminates.
Pool and laundry products and common household
and hobby products often contain fluorine or chlo-
rine compounds. When these chemicals pass
through the burner and vent system, they can form
strong acids. These acids can create corrosion of
the heat exchanger, burner components and vent
system, causing serious damage and presenting a
possible threat of flue gas spillage or water leakage
into the surrounding area.
Please read the following information. If contami-
nating chemicals will be present near the location of
the combustion air inlet, the installer should pipe the
combustion air inlet to another location per the
CHALLENGER installation manual.
WARNING
WARNING
Potential Contaminating Products
-
Spray cans containing chloro/fluorocarbons
- Permanent Wave Solutions
- Chlorinated wax
- Chlorine - based swimming pool chemicals and
spa cleaners
- Calcium Chloride used for thawing ice
- Sodium Chloride used for water softening
- Refrigerant leaks
- Paint or varnish removers
- Hydrochloric acid / muriatic acid
- Cements and glues
- Antistatic fabric softeners used in clothes dryers
- Chlorine-type bleaches, detergents, and clean-
ing solvents found in household laundry rooms
- Adhesives used to fasten building products and
other similar products
Areas likely to find these products
- Dry cleaning / laundry areas and establishments
- Beauty salons
- Metal fabrication shops
- Swimming pools and health spas
- Refrigeration Repair shops
- Photo processing plants
- Auto body shops
- Plastic manufacturing plants
- Furniture refinishing areas and establishments
- New building construction
- Remodeling areas
- Garages with workshops