Operation Manual

Cancel:
REMARK
Time on and Time off functions can not be set to the same time. If they are the same, the stop time will be
delayed by 10 minutes automatically. For example, if Time on and Time off are set to 1:00 at the same time,
the stop time will be adjusted to 1:10 automatically.
The Time off function can not be used alone. The key can be used only after Time on has been set. The user
can press the on\off key manually beyond the Timer range.
EN 20
Power On and Power Off: Press Power On/Power Off button when the setting above has been finished
and the system will run according to the setting. And simply press the same button to stop it.
Press the „UP” and „DOWN” key, you can adjust the hour.
Press the
TIME OFF
key again, the minute digit stops
flashing and the hour digit starts flashing.
Stop operation for about 10 seconds, flashing stops and
TIME
ON + TIME OFF set is finished.
In the unlocked state, press the
CANCEL
key for 1 second, the
TIME ON + TIME OFF functions will be cancelled.