Operation Manual

The Temp displayed is the water temperature in the upper part of the tank. Default is 55°C and the
Economy Mode setting range is 38~60°C, while the Hybrid and E-heater Mode setting range is also the
same, 38~60°C.
Method for set
Timer
The user can set up a running start time and a stop time specifically by the Timer function. The least
number set for the time is ten minutes.
Time on: The user can set up a start time by this. The appliance will auto run one time between the set time
and 24:00 on the same day.
EN 17
Method for set
Press
„UP”
and
„DOWN”
key, you can increase or decrease
water temperature.
When the set temperature is higher than 50
°
C, the HIGH
TEMP indicator will light up.
Press „UP” and „DOWN” key, you can adjust the minute.
Press the
TIME ON
key, the minute digit of the clock ont he
display starts flashing slowly.