Operation Manual

Before starting up the hot water tank, please check that the installing technician has performed all
required operations of installation. Please ensure that You have properly understood the information provided
by the installing technician on how to use the hot water tank and how to perform the operations on the
appliance.
3.2. Instructions and warranty
The manual is an integrated and indispensable part of the appliance. Do not remove the data label on
the appliance for any reason as these data may be required for any possible future reparations.
Please, read the warranty document related to the appliance carefully. This document contains
specifications regulating warranty.
3.3. Recommendations
In case of failure and /or defective operation, please do not try to search the error and correct it, rather,
switch the appliance off and turn to our service. In case of reparation, original spare parts are to be used
exclusively, and any type of reparation work can only be performed by a qualified technician. Failure to
consider these recommendations may endanger the safety of the appliance and it invalidates the responsibility
undertaken by the manufacturer.
If the appliance is not used for a longer period, it is recommended to perform the following:
- disconnect the appliance from the electric power system in a way that if there is a switch between the
appliance and the power system, then turn the switch into “OFF” position.
- close all the faucets of the water pipeline of the household
EN 12
WARNING!
It is recommended to discharge water from the appliance if it is not used and it is placed in a
location that is exposed to frost. This operation can only be performed by a qualified technician.
WARNING!
Running hot water with temperature above 50 °C may cause serious burn marks. The maximum
water temperature displayed on the indicator is 60 °C, which value can be actually higher than that in
case of defective operation. Children, disabled persons and elder persons are highly exposed to burn
marks. It is therefore recommended to connect a thermostatic mixing valve to the water outlet pipe of the
appliance.
3.4. Safety precautions
The explanation of the symbols used in the table below is described in details in point 1.3, chapter
GENERAL INFORMATION.
Warning Danger
1.
Do not perform any operation that
causes removal of the appliance
from its operational place.
Danger of electric shock caused by touching the parts
under power.
Flood caused by water leaking from disconnected pipes.
2.
Do not leave any object on the
appliance.
Personal injuries caused by falling objects due to
vibration effect.
Damage of the appliance or objects under the
appliance caused by falling objects due to vibration
effect.
3.
Do not climb onto the appliance.
Personal injuries caused by fall over of the appliance.
Damage of the appliance or objects under the
appliance caused by fall over of the appliance from its
mounted place.
4.
Do not perform any operation that
requires opening the appliance.
Electric shock caused by touching the parts under
power. Burn marks caused by overheated parts and
injuries caused by sharp edges or salients.