User's Manual

The two buttons on the electrode sheet are buckled onto the device, the film on the
electrode sheet is removed, and the electrode sheet is attached to the body part
where requires health care. The following is the operating instructions for the Fatigue
Relieve Massage Machine:
5.1 Charging: When first use, please use the USB charging cable with this unit to
connect to the USB port of the device and charger for charging. When the device is in
charge, the red indicator light is always on, and all buttons are not available. After
the charging is completed, the red indicator light is off and the green indicator light is
on. Charging voltage is 5V DC.
5.2 Power On: Press and hold the [Power] button for more than 3 seconds to boot.
The default mode is 1 and the preset intensity is 1 after power is on, the first
indicator light is always on.
5.3 Power Off: Press and hold the [Power] button for more than 3 seconds to shut
the device down. It can be turned off at any state or mode.
5.4 Pause: Long press [+] button or [-] button for more than 3 seconds to pause.
After pausing it, short press [+] button or [-] button to restart. If no button has
operated in 60 seconds at the suspended state, the machine will shut down
automatically.
5.5 Current Intensity Increment/Decrement: When the device is enabled, press [+]
button or [-] button to increase/decrease the current intensity. There are 10
intensities totally. Mode 1 is the weakest, Mode 10 is the strongest.
5.6 Mode Switching:
①When the device is enabled, short press [Power] button to switch the mode.
When switching to a new mode, the preset intensity is 1.
②When the mode 1 is in use, the first indicator light is always on. When mode 2 is
in used, the first and second indicator lights are always on, and the other modes
work in a similar way.
Electrodes