Troubleshooting guide

DEMONSTRATION
MILLPWR
®
Operation Manual
4-6
Next program the arc:
• Press the
ARC key.
MILLPWR assumes that you are continuing from where
you left off so it automatically fills in the “From” point,
the depth and tool information for you.
• Enter the following information into the “To” and
“Radius” fields:
TO: X2 = 0 ABS
Y2 = -1.5 ABS
RADIUS: 1.5 MINOR
Since this arc will be starting at the top and moving
around to the bottom, choose
CW for the direction.
DIRECTION: CW
• Press the
USE key.