Troubleshooting guide

PROGRAMMING

MILLPWR

Operation Manual

3-39

• Now press the

BACKUP PROGRAMS softkey. MILLPWR will highlight each program as

a backup copy is saved in the directory you've selected.

Note:

If a program with the same name is already stored in the directory you've chosen,

MILLPWR will ask you if you want to replace the old copy with the latest copy. Choose

the

YES softkey or YES TO ALL softkey to continue or the NO softkey to cancel.

Deleting a Program

You can delete any program that has been saved.

o delete a program:

• Select the directory that contains the program you want to delete (refer to Selecting a

Directory).

• From the PGM screen, press the

PROGRAM FUNCTIONS softkey, then press the DELETE

softkey.

• Using the arrow keys, highlight the program you want to delete.

• Press the

DELETE softkey. You will be asked if you are sure that you want to delete the pro-

gram. Press the YES softkey to continue or the NO softkey to cancel.

By answering "Yes," you will erase the highlighted

program from memory. Deleted programs cannot be recovered

unless a backup file was previously created.

IMPORTANT