Troubleshooting guide

ManualsBrandsAcuRite ManualsClockSet and Forget

141

142

143

144

145

146

147

148

149

150

PROGRAM STEPS

MILLPWR

Operation Manual

5-49

To add a space, move your cursor to a blank spot anywhere within the

"Characters" box and press the

ENTER key.

• Press the

EDIT TEXT softkey when entering your characters.

• Press the

USE key.

Ellipse Frame

An ellipse frame is a closed curve with

an oval shape. The only offset available

for this is center offset. Due to the nature

of an ellipse, when the center of the tool

tracks an ellipse, its edge will have some

error. To minimize the amount of error

and cut the most accurate possible

ellipse, use the smallest tool diameter

available.

To cut an inside ellipse, subtract the tool

diameter from the size in both X-and Y-

axes.

To cut and outside ellipse, add the tool diameter to the size in both X-and Y-axes.

o program an ellipsed frame:

• From the PGM screen, press the MORE STEPS softkey.

• Press the

MORE STEPS softkey again.

• Press the ELLIPSE FRAME softkey.

• Enter the location of the center point for the X-and Y-axes.

• Enter the size along the X-and Y-axes.

• Enter the depth.

• Select the cutting path direction. Press the

CW softkey for a

clockwise direction or the

CCW softkey for a counter-clock

wise direction.

• Enter the feed rate.