Troubleshooting guide

PROGRAM STEPS
MILLPWR
®
Operation Manual
5-41
Mirror
Condition: The steps being mirrored must precede the “Mirror” step.
With “Mirror,” you can create a mirror image of an entire program or a section
of a program.
T
o program a mirror:
• From the PGM screen, press the MORE STEPS
softkey.
• Press the
MIRROR softkey.
• Enter the number of the first step and the last step
in the step range that you want to mirror.
• Define the axis of reflection (a line that separates
the mirrored image from the original one).
For “1
ST
Axis Point,” enter the X- and Y-axes
coordinates for the axis of reflection.
For “2
ND
Axis Point,” enter the X- and Y-axes
coordinates for the axis of reflection.
• Enter an offset for the Z-axis.
• Press the
USE key.