Installation Guide

5
Set the Time, Date & Units
Press and release the "SET" button, located on the back of the clock, to enter
SET MODE. Once in SET MODE the preference you are currently setting will
ash on the clock.
To adjust the currently selected (ashing) item, press and release the “ ” or
“ “ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button to adjust the next
preference. The preference set order is as follows:
AUTO DST (ON or OFF)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE UNITS (ºF or ºC)
*If you live in an area that observes Daylight Saving Time, DST should be set
to ON, even if it is not currently Daylight Saving Time.
You will automatically exit SET MODE if no buttons are pressed for 10 seconds.
Enter SET MODE at any time by pressing and releasing the “SET” button.