Manual

7
Alerts & Messages
Text on Display Alerts Message
STRIKES
DETECTED!
2 beeps & light
ashes
Lightning has been detected within 25
miles
INDOOR
None
Conrms the detector is set to operate
indoors
LISTENING..
None Detector is ready for use
LO BATTERY.
icon &
1 beep/minute
Replace batteries
NA
None Lightning detected beyond 25 miles
PLEASE WAIT
None Detector is calibrating itself
UNABLE TO
DETECT…PLEASE
RELOCATE
1 beep
Interference detected, use the detector
in a different location
MUTED
None
Audio alerts temporarily silenced. Press
AND HOLD the "LIGHT" button for 5
seconds to re-enable audio alerts.
Troubleshooting
Display reads "UNABLE
TO DETECT…PLEASE
RELOCATE"
• Relocate the detector.
• Make sure the detector is placed at least 3 feet
(.9 m) away from electronics that may cause
interference (see page 6).
Display screen
not working
• Check that the batteries are installed correctly.
Batteries may need to be replaced.
Detector beeping
• Review the Alerts & Messages chart above to
determine why the detector is beeping.
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
[phone] for assistance.