Specification Sheet

Specifications :

Sensor Installation

5-in-1 sensor installation

Icon Definitions

Click here

Replacement Parts

Replacement 6-foot USB cable: 11191-PCUSB

5-in-1 PRO Weather Sensor: 06014RM

5-in-1 Weather Sensor: VN1TXC

PRO+ Upgrade for the 5-in-1 Sensor: 5N1DSSA

Replacement 5-in-1 Sensor Wind Cups: 5N1WC / 06031RM

Replacement 5-in-1 Sensor Wind Cups Assembly (with Bearings): 5N1WCBSA

Replacement 5-in-1 Sensor Wind Vane: 5N1VANE

Replacement 5-in-1 Sensor Mounting Bracket: 5N1MB

Mounting Tripod for Environmental Sensors: 06055M

Specifications

DISPLAY

Indoor Temperature Range: 32º to 122º F, 0º C to 50º C

Indoor Humidity Range: 1% to 99% RH

Data Reporting Indoor data: 60 second updates

Power: 5V AC adapter (recommended for optimal display color), 3 AA alkaline batteries

5-IN-1 WEATHER SENSOR

Outdoor Temperature Range: -40º to 158º F, -40º C to 70º C

Outdoor Humidity Range: 1% to 99% RH

Wind Range: 0 to 99 mph

Rainfall Measurement: Measures 0.01 inches (0.25 mm) and up

RF (wireless) Range: 330 feet (100 meters)

Data Reporting: Wind Speed: 18 second updates; Wind Direction, Temperature & Humidity: 36 second

Wireless Frequency: 433 MHz

Power: 4 AA alkaline or lithium batteries; Lithium batteries recommended for temperatures below -4°F/-

ACCURACY

Temperature Accuracy: +/- 2 degrees Fahrenheit; Learn More

Humidity Accuracy: +/- 5%

Wind Speed Accuracy: up to +/- 5mph

Rainfall Accuracy: +/- .05" per inch

Troubleshooting

Issue

Possible Solution

PAGE 1
Specifications : Sensor Installation 5-in-1 sensor installation Icon Definitions Click here Replacement Parts Replacement 6-foot USB cable: 11191-PCUSB 5-in-1 PRO Weather Sensor: 06014RM 5-in-1 Weather Sensor: VN1TXC PRO+ Upgrade for the 5-in-1 Sensor: 5N1DSSA Replacement 5-in-1 Sensor Wind Cups: 5N1WC / 06031RM Replacement 5-in-1 Sensor Wind Cups Assembly (with Bearings): 5N1WCBSA Replacement 5-in-1 Sensor Wind Vane: 5N1VANE Replacement 5-in-1 Sensor Mounting Bracket: 5N1MB Mounting Tripod for Environ
PAGE 2
Specifications : I need help with the PC Connect software or My AcuRite For more information for setting up and troubleshooting PC Connect and My AcuRite, click here. Outdoor temperature is flashing or showing dashes Flashing of the outdoor temperature may be an indication of wireless interference.  Make sure the A-B-C switch in the battery compartments of both the display unit and sensor are switched to Sometimes changing to a different channel can help.
PAGE 3
Specifications : 5. To further defend against insects crawling into your sensor, you may place a moth ball in the nook, near the tape. Note: Insect repellant may be used for additional protection, but should not be sprayed on the internal comp 6. Reassemble the 5-in-1 sensor by replacing the (4) four screws on the bottom of the sensor that were remov 7.