Instructions / Assembly
3
High & Low Records
High and low records are displayed for temperature and humidity. 24-hour
records automatically clear every 24 hours since the batteries were installed.
All-time records are the maximum and minimum readings recorded since the
batteries were installed. To toggle between the records being shown, press and
release the “RECORDS” button.
The Humidity Level Indicator also displays the high and low humidity range
over the past 24 hours. Press and release the “ ” or “ ” buttons to enable
the humidity range view.
To manually clear the records currently being viewed, press and HOLD the
“RECORDS” button for 3-5 seconds. Dashes display to conrm you have
cleared the records.
Using the Humidity Monitor
Humidity Level Indicator
The Humidity Level Indicator easily conveys a low, high or ideal indoor
humidity level for your home and health:
Learn more at http://www.acurite.com/humidity-health
Calibration
The temperature and humidity readings can be calibrated on the display to
improve accuracy. Calibration can improve accuracy when product placement
or environmental factors impact your data accuracy.
1. To access calibration mode, press AND HOLD the “ “and “ “ buttons
simultaneously for at least 5 seconds.
2. To adjust the currently selected item, press and release the “ “ or “ “
buttons to calibrate the data value higher or lower from the actual reading.
3. To save your adjustments, press and release the “RECORDS“ button to
adjust the next reading. The CALIBRATED indicator will remain under the
calibrated values.
After 12-15 seconds of inactivity, the display will save the adjustments and exit
calibration mode. Note: Calibrations will be erased if the batteries are removed.
OPERATION