Instruction Manual Weather Station models 01021 / 06047 CONTENTS Unpacking Instructions............ 2 Package Contents................... 2 Product Registration................ 2 Features & Benefits: Lightning Sensor... 3 Features & Benefits: Display..... 4 Features & Benefits: Rain Gauge... 7 Setup..................................... 8 Lightning Sensor Setup............ 8 Rain Gauge Setup................... 9 Display Setup........................10 Set the Time, Date & Units......
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove. Package Contents 1. Display with Tabletop Stand 2. Lightning Sensor 3. Rain Gauge 4. Power Adapter 5.
Features & Benefits LIGHTNING SENSOR 1. Integrated Hanger For easy placement. 1 2. Wireless Signal Indicator Flashes when data is being sent to the companion unit. 2 3 3. Interference Indicator 6 Flashes when interference is detected (see page 14). 7 4. A-B-C Switch 4 ID code that must match display’s A-B-C switch to ensure units synchronize. 5 5. Battery Compartment 6. Lightning Strike Indicator Indicates a lightning strike has occurred within 25 miles (40 km). 7.
Features & Benefits FRONT OF DISPLAY 32 31 30 1 29 2 3 4 28 5 6 27 7 8 26 9 10 25 24 11 12 8 23 13 22 14 15 16 1718 19 4 20 17 21
FRONT OF DISPLAY 16. RECORDS Button Press to view historical records. 1. Current Outdoor Temperature 17. SELECT and SELECT Buttons Arrow indicates direction temperature is trending. For setup preferences and display navigation. 2. Outdoor Low Temperature Record 18. Lowest temperature recorded since midnight. 3. Outdoor High Temperature Record SET Button 19. ENTER Highest temperature recorded since midnight. For setup preferences. 20. Display Low Battery Indicator 4.
Features & Benefits 1 7 2 6 3 5 4 BACK OF DISPLAY 4. Power Adapter 1. Integrated Hang Hole For easy wall mounting. 5. Battery Compartment Cover 2. RESET Button 6. Battery Compartment Press and release for full reset to factory defaults. 7. A-B-C Switch ID code that must match the lightning sensor and rain gauge's A-B-C switches to ensure units synchronize. 3.
Features & Benefits 1 2 3 SQUEEZE ABC 4 5 RAIN GAUGE 1. Rain Gauge Cover 4. Rain Gauge Base 2. Rain Gauge Tipping Cups 5. A-B-C Switch ID code that must match display’s A-B-C switch to ensure units synchronize. Collects and empties rain for continuous rain measurement. 3.
SETUP Lightning Sensor Setup 1 Set the A-B-C Switch The sensor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the sensor for temperatures below -4ºF / -20ºC. Locate the A-B-C switch inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for the display, rain gauge and lightning sensor in order for the units to synchronize. 1.
Rain Gauge Setup Install or Replace Batteries AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. 1 2 SQUEEZE LARGE TAB SQUEEZE LARGE TAB 3 4 SQUEEZE SQUEEZE TABS TO OPEN 1. S eparate rain gauge cover from the base by gently squeezing tabs and pulling the cover upwards. 2. R emove battery box by squeezing the two tabs on each end together (take note of battery box orientation, for re-installation).
Display Setup 1 Set the A-B-C Switch 2. I nsert 3 x AA alkaline batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment. Locate the A-B-C switch inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for the display, rain gauge and lightning sensor in order for the units to synchronize. 3. Replace the battery cover.
Set the Time, Date & Units The display will automatically enter SET MODE after the unit has powered on. Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected item, press and release the “SELECT ” or “SELECT “ buttons (press and HOLD to fast adjust). SET ” button again to adjust To save your adjustments, press and release the “ ENTER the next preference.
Rain Gauge Installation • To ensure accurate rain measurement, the rain gauge MUST be placed on a flat, level surface. • Ensure the rain gauge is not placed in a low spot that could become flooded or in an area where there are obstructions above it. OK DO NOT the rain gauge DOcover NOT from the rainDO NOT base. DO 1. Separate gauge PLACE IN WATER OR PLACE IN AREAS WHERE PLACE IN AN PLACE ON A LEVEL 2. LocateORthe onGROWTH the rain IN UNEVEN LOWtwo holes PLANT CANgauge base.
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of the display, 5-in-1 sensor and lightning sensor is critical to the accuracy and performance of this product. Display Placement Place the display in a dry area free of dirt and dust. Display stands upright for tabletop use or is wall-mountable. Lightning Sensor Placement Sensor must be placed outside to observe outdoor conditions.
Lightning Sensor Installation Guidelines False Detection This sensor features advanced technology to distinguish between lightning strikes and interference, however in rare cases the sensor may "false detect" lightning activity due to interference. In these situations, verify there is no lightning in the area and then relocate the sensor. If the false detections persist, identify and relocate the source of interference or relocate the sensor.
OPERATION Using the Weather Station Learning Mode Self-Calibrating Forecasting uses a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. icon disappears from the display screen. At this point, After 14 days, the the self-calibrated pressure is tuned in to your location and the unit is ready for superior weather prediction.
Programmable Weather Alarms Each selectable weather category features an alarm option. When an alarm sounds, the display emits audible beeping and flashes the affected category, its alarm settings, and any other relevant data. Alarms can be customized to alert you when your programmed value is reached. Alarms include: OUTDOOR TEMPERATURE OUTDOOR HUMIDITY LIGHTNING STRIKES (ON/OFF only; ON by default) RAINFALL Setup an Alarm 1.
High & Low Records Today’s high and low records are displayed for outdoor temperature and humidity. Today’s records automatically clear at 12:00am midnight every day. Historical records can also be viewed by accessing the records menu. Records include: OUTDOOR TEMPERATURE OUTDOOR HUMIDITY BAROMETRIC PRESSURE LIGHTNING STRIKES RAINFALL To view historical records, press and release the RECORDS button to cycle through all-time records.
Troubleshooting Problem No lightning sensor or rain gauge reception no bars Display screen not working Possible Solution If the wireless signal indicator shows no bars: • Relocate the display and/or the lightning sensor. The units must be within 330 ft (100 m) of each other. •R elocate the display and/or the rain gauge. The units must be within 100 ft (30 m) of each other. •M ake sure all units are placed at least 3 feet (.
Troubleshooting Problem Possible Solution Inaccurate forecast • Weather Forecast icon predicts conditions for the next 12 to 24 hours, not current conditions. • Has the icon disappeared from the display? Learning Mode must complete before forecast and pressure will be accurate. • Allow unit to run continuously for 33 days. Battery removal or resetting the display will restart Learning Mode. After 14 days, forecast should be fairly accurate, however Learning Mode calibrates for a total of 33 days.
Calibration Calibrate Temperature, Humidity & Barometric Pressure The outdoor temperature and humidity readings, and barometric pressure can be calibrated on the display to improve accuracy. Calibration can improve accuracy when sensor placement or environmental factors impact the data accuracy. SET ”, and “ 1. To access calibration mode, press AND HOLD the “SELECT”, “ ENTER ” SELECT buttons simultaneously for at least 5 seconds. 2.
Tips • There should be nearly an equal number of water drops between cup tips. If not, then adjust the calibration screws beneath the tipping lever until an equal number of water drops are tipping the cups. Then, restart the calibration procedure. • If you don’t hear the cups tipping and see water dripping alternately out of each drain, there may be an issue with the rain gauge or it’s adjustment. Adjustment If the rain gauge doesn’t register close to 1.68” (42.
Specifications TEMPERATURE RANGE Outdoor: -40ºF to 158ºF; -40ºC to 70ºC HUMIDITY RANGE Outdoor: 1% to 99% LIGHTNING DETECTION RANGE 1 - 25 miles / 1.6 - 40km RAINFALL MEASUREMENT 0.01 inches (0.
Customer Support AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 Visit us at www.AcuRite.
Weather Stations Temperature & Humidity Weather Alert Radio Kitchen Thermometers & Timers Clocks It’s more than accurate, it’s AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence™. www.AcuRite.com Printed in China 06047 INST 071816 ©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147.
