User Manual

ID# XXXXXXXXX
model# XXXXXX
FCC XXXXXX
AcuRite.com
WHAT YOU NEED
(not included)
• At least one compatible AcuRite device
• Network router with an available Ethernet port
• “Always-on” internet connection
1
2
CONNECT ACCESS
Connect the Ethernet cable to the Access
DEVICE ID
WRITE DOWN THE Device ID;
printed on the bottom of the device.
You will need this when adding the
Access to myacurite.com.
PACKAGE CONTENTS
1. AcuRite Access
2. Ethernet cable
3. AC power adapter
CONNECT
3
Connect Ethernet cable to your
network router.*
INSTALL BACKUP
BATTERIES
4
On the bottom of the Access, remove
the battery cover, then
insert three AA
alkaline batteries.
WAIT
6
After starting the Access, the
device will connect to My AcuRite
and download available firmware
updates. It may take up to 30
minutes. When Network Status
Light stops flashing (is solid), you
are READY for the next step.
2
3
1
CREATE YOUR ACCOUNT
7
Create your account and register your Access at www.myacurite.com.
NOTE: It may take up to 10 minutes for the Access to communicate with
the My AcuRite service.
OR
www.MyAcuRite.com MyAcuRite APP
AcuRite
AcuRite
Access
5
PLUG IN
Plug in the power adapter. The Access
will take a minute to start up.
POWER
ON
ID# XXXXXXXXX
model# XXXXXX
FCC XXXXXX
AcuRite.com
STEADY
BLUE LIGHT
WAIT
® TM