Installation Guide

6
Placement Guidelines
For the most accurate reading, extend the anemometer using the built-in extension
arm. Extending the anemometer helps prevent surrounding objects from impacting the
accuracy of the wind speed reading.
Specications
TEMPERATURE RANGE
-40ºF to 158ºF; -40ºC to 70ºC
HUMIDITY RANGE
1% to 99%
WIND SPEED RANGE
0 to 60 mph; 0 to 97 km/h; 0 to 52 knots; 0 to 27 m/s;
0 to 1990 ft/min
POWER
3 x AAA alkaline batteries
DATA REPORTING
Temperature: 30 second updates
Humidity: 30 second updates
Wind: 1 second updates
Altitude: 5 second updates
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
Troubleshooting
Problem Possible Solution
Display screen
not working
• Check that the batteries are installed correctly. Batteries
may need to be replaced.
• Display may need to be reset. See page 5 for
instructions on how to reset the unit.