Installation Guide

3
Features & Benets
1. Inspection Light
Automatically turns off after
15 minutes.
2. Wind Speed Anemometer
Features extendable design
(shown).
3. Button
Press to enable/disable
inspection light.
4. Current Wind Speed
5. Indicator
Indicates inspection light is on.
6. Average Wind Speed
Average of all speeds over the
past minute.
7. Indicator
Indicates an alarm is set for PEAK
wind speed.
8. Altitude
Displays current altitude, change in
altitude, and elevation gains and
losses since unit was powered on
(see page 5).
9. Integrated Hanger
10. Tripod Mount
For compatible tripods with
1/4” 20 thread tting (not
included).
11.
T
and V Buttons
For setup preferences and
cycling through available modes.
Activates momentary backlight for
10 seconds.
12. Low Battery Indicator
13. Peak Wind Speed
Highest speed from the past
minute.
14. / ENTER Button
For setup preferences. Activates
momentary backlight for
10 seconds.
3
2
4
5
6
8
9
10
11
11
12
13
14
7
1