Instructions / Assembly

10 | P a g e
TECHNICAL SPECIFICATIONS: Foam
I. TYPICAL PROPERTIES
PROPERTY TEST METHOD UNIT VALUE
PHYSICAL
Specific Gravity
Water Absorpon
Shore D Hardness
ASTM D 792
ASTM D 570
ASTM D 2240
g/cm^3
%
__
0.75
.30
52
MECHANICAL
Tensile Strength at Yield
Elongaon at Break
Flexural Modulus
Impact Strength(Charpy Unnotched)
Dielectric Strength
ASTM D 638
ASTM D 638
ASTM D 790
ASTM D 256
ASTM D 149
psi
.%
Psi
 lb/in^2
kv/mm
3,000
15
130,000
7
12
THERMAL
Heat Distoraon Temperature
(under load at 264 psi)
Coefficient of Linear Expansion
Thermal Conducvity
ASTM D 648
ASTM D 696
ASTM D 177
°F
In/in/°F
Btu in/hr ^2 °F
140
35 x 10^-6
0.50
II. FLAMMABILITY STANDARDS
OTHER PROPERTY RATING
THERMAL
UL 94
UL 94
UL 48
V0
5V
N/A
Passed
Passed
Passed
III. AVAILABILITY
STANDARD CUSTOM
SIZE 4 x 8 (48” x 96”) Available upon request
COLORS
1/8” (3mm) & ¼” (6mm)
White, Black, Beige, Dark Gray,
Light Gray, Red, Dark Yellow, Dark
Blue, Green
Available upon request
GAUGES
In millimeters
1 through 6, 10 & 12.7 Available upon request
The informaon contained herein is true and accurate to the best of our knowledge. All recommendaons and suggesons are m ade
with guarantees. This informaon is to be used by individuals with technical skill at their own discreon and risk.